Hot Working Tool Steel, Mold Steel1.2344ESR/H13/4Cr5MoSiV1/8407/SKD61

• Customization: Available
• Type: Round, Flat, Block, Hollow Bar, Irregular Forging
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Composition: Alloy Steel
• Technique: Forged
• Shape: Round, Flat, Block, Hollow Bar, Irregular Forging
• Surface Treatment: Black/Milled/Turned/Polish
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Mold Steel
• Application: Die Casting Molds,Extrusion Molds,Plastic Mold
• Transport Package: Nuded Package
• Specification: &Phi: 50-1000; 80-800*300-2000
• Trademark: ChangXiang special steel
• Origin: Jiangyou City, Sichuan Province
• HS Code: 7228400000
• Production Capacity: 50000tons/Year

Product Description

INTERNATIONAL STEEL GRADES

ISO	DIN	ASTM/ANSI	JIS	GB
X40CrMoV5-1	DIN1.2344	H13	SKD61	4Cr5MoSiV1

APPLICATION
1.2344ESR/H13/4Cr5MoSiV1/8407/SKD61 is used to manufacture forging dies, hot extrusion dies, and precision forging dies with high impact loads; Aluminum, copper and their alloy die-casting molds.
Eg :
Die casting molds, such as die cores, inserts, thimbles, and sleeves
Extrusion molds, such as mold cores, mold pads, and liners
Hot pressing mold for aluminum,copper,magnesium
Plastic mold,such as auto lamp mould 
Cold punching, trimming, hot shearing, tightening rings, and wear-resistant components

CHARACTERISTICS
Electroslag remelting steel, which has high hardenability and resistance to hot cracking, contains a high content of carbon and vanadium, has good wear resistance, relatively weakened toughness, and good heat resistance. It has good strength and hardness at higher temperatures, high wear resistance toughness, excellent comprehensive mechanical properties, and high tempering stability.

TEHNICAL INDEXC

1.In strict conformity with chemical composition(W.t%):

element	C	Si	Mn	P	S	Cr	Mo	V
standard	0.37/ 0.42	0.90/ 1.20	0.30/ 0.50	≤  0.030	≤  0.030	4.80/ 5.50	1.20/ 1.50	0.90/ 1.10

The allowable deviation of the chemical composition of finished steel products should comply with the provisions of GB/T222-2006.

2.Smelting process
EAF+LF+VD+ESR

3.Production process
Hot forging+Spheroidization annealing & EFS 

4.Delivery hardness
≤235HB

5.Forging ratio
≥6:1

6.Grain size
According to ASTM E112 standard, the qualification level is evaluated as ≥ 7.

7.Delivery length
Delivered at 2.0-5.8 meters.

8.Surface state
Rough turning,Remove the top needle hole;Sawing at both ends(Cold cutting);Flat.

9.Dimensional tolerance
Φ0/+3mm.

10.Testing requirements
100% piece by piece inspection according to SEP 1921-84 3 D/d level to ensure qualified inspection.

11.Quality Assurance Certificate
Provide original factory warranty certificate.

12.Spray recognition requirements
Spray painting according to customer requirements;
One end of the product is sprayed with the following content:Steel grade,Specifications,Weight,Oven number and CHANGXIANG.