H11/1.2343/SKD6/ X37CrMoV5-1/4Cr5MoSiV/4H5MFS
HOT WORK TOOL STEEL
| INTERNATIONAL STEEL GRADES |
| ISO |
DIN |
Russia |
| X37CrMoV5-1 |
ISO4957-2018 |
1.2343 |
DIN4957-2018 |
4H5MFS |
GOST5950-2000 |
| USA |
Japan |
China |
| H11 |
ASTM A 681-2022 |
SKD6 |
JISG4404-2021 |
4Cr5MoSiV |
GB1299-2000 |
APPLICATION:
This material is mainly used in moulds for die-casting of light metals, auto light mould, loaded parts of presses, highly loaded dies for presses, upsetting punches, die inserts and tools for fusible alloy extrusion. Tools for the manufacturing of sleeves, for the manufacturing of screws, nuts, rivets and pins.
SPECIFICATION:
It is characterized by very high hardenability, resistance to tempering, possibility of working at high temperatures and low susceptibility to forming a surface crack net.Disadvantages of the grade are low sensitivity to rapid temperature fluctuations during operation, low impact and shock resistance. Before use the tools must be warmed to a minimum temperature of 200 C, but must not exceed the tempering temperature.
| CHEMICAL COMPOSITION |
| C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
| 0.36-0.42 |
0.90-1.20 |
0.30-0.50 |
≤0.030 |
≤0.030 |
4.80-5.50 |
1.10-1.40 |
0.25-0.50 |
| PRODUCTION FLOW&I TECHNICAL INDEX |
| Size Range |
Round 80-1000mm; Flat 80-500mmx300-1500mm |
| Smelting |
EAF+LF+VD(or +ESR) |
| Production Process |
Hot Forged+Spheriodizing Annealing≤229HB(or +EFS) |
| Heat Treatment |
Softening annealing at a temperature of 800 - 840ºC
Hardening at a temperature of 980 - 1050ºC
Tempering at a temperature of 450 - 550ºC
Relaxing annealing in the range of 470 - 550ºC
Nitriding at a temperature of 470 - 550ºC |
| Forging Ratio |
≥6:1 |
| Surface |
Machined |
| Non-metallic Inclusions |
Acc. To ASTM E45 or finer
A(Thin 1.0 Heavy 1.0); B(Thin 1.0 Heavy 1.0);
C(Thin 1.0 Heavy 1.0); D((Thin 1.0 Heavy 1.0); |
| Grain Size |
Acc. To ASTM E112≥ 7 or finer |
| Microstructure |
Acc. To NADCA 207-2003 AS1-AS9(for die casting mould) |
| Impact Value |
Acc. To ASTM E23-2002a(for die casting mould) |
| UT |
SEP1921-84 3 D/d or finer |
Jiangyou Changxiang Special Steel Manufacturing Co.,Ltd. was stablished in 2006, total over 480 staff and cover 940,000 square meters area,with subsidiary company Changxiang Forging Mould Co.,Ltd.(Since 2017) and Shuangma Electric Power Co., Ltd. are belong to Changxiang Group. Our steels be widely used in industries ofmilitary,nuclear,aviation,clean energy,steam turbine,moulds,automobile,
petroleum, chemistry,marine,mechanics, etc.
Changxiang started export business since 2010,and we have exported to 23 countries and areas which including Germany,Poland,Italy,Spain,
Canada,USA,Brazil,Turkey,Singapore and Japan,etc.
Being a professional manufacturer of hot forged special steels,forgings and the largest forged tool steel stock trade center in Southwest of China,it's our responsibility to supply you stable quality steels,service and we'd like to be your reliable partner in global market.
COMPLETE PRODUCTION LINE
| Hydropower Station |
2×11000KW Generator to supply electricity for smelt and heat treatment; |
| Smelting Capability |
30Ton EAF+30Ton LF+30Ton VD+1~15Ton Argon-shield ESR; |
| Forging Capability |
4500Ton Forging Press+3150Ton Forging Press+1600 Ton Forging Press;
6Ton Electro-hydraulic Hammer+5Ton Electro-hydraulic Hammer; |
| Heat Treatment Capability |
21 Electric Furnaces for Annealing,Normalizing,Tempering;
Workshop for QT(quenching+tempering)/Solution&Aging/EFS; |
| Machining Capability |
34 Sets Machining Equipments; |
| Physical&Chemical Test Center |
27 Sets Test Equipments; |
ADVANTAGES
△Complete Production Line: Electric Power,Smelting,Forging,Heat Treatment,Machining,Physical&Chemical Test Center.
△Technology Innovation: Research with Chongqing University and Beijing Iron&Steel Research Institue;
△Full production process can be controlled from very primary stage smelting;
△Competitive Grades: 1.2344,1.2343,1.2083,1.2085,1.2379,1.2316,1.2360,1.2365,1.2367,1.2714,1.2767,S136,616,630,irregular forgings,etc;
CHANGXIANG TOOL STEEL SUPERMARKET
△Rich Stock: over 8,000tons(>30 kinds): plastic tool steel; hot work tool steel, cold work tool steel, stainless steel;
△Wide Range Specifications: Diameter 80-1000mm; Thickness 80-800mm; Width 100-1800mm;
△Quick Delivery From Stock: within 3 days deliver to any port of China;
CHANGXINAG SPIRITS: Honesty, Quality, Service, Efficiency;
FAQ:
1.Are you factory or trader?
Changxiang is a factory has own hydropower station,smelting,forging,heat treatment,machining,physical&chemical test center
and innovation lab.
2.Do you have stock?
We built our brach company in 2017 and we produced over 8,000Tons kinds of hot forged tool steels in our warehouse which mainly including:
1.2344ESR,1.2343ESR,1.2714QT,1.2714SA,1.2085QT,1.2083,1.2316ESR,718,17-4PH,15-5PHetc.
3.What are your hot sales materials?
1.2344ESR(H13),1.2343ESR(H11),1.4057ESR(431),1.2085QT,1.2316ESR,1.2367ESR,1.4542,1.4545,1.4313,1.2379(D2),D7,1.4112,etc.
4.Can we visit your factory?
Welcome to visit us at any time.
5.Which port be loaded?
Mostly we loaded in Shanghai port.
6.What's the production size range?
Diameter 80-1000mm; Thickness 80-800mm; Width 300-1800mm.
7.Production and Test Equipments?
Electric Energy: 2x11,000KW hydropwer engines to guarantee smelting and heat treatment electricity energy;
Smelting: 30MT EAF+30MT LF+30MT VD+1-15MT ESR
Forging: 4500MT+3150MT+1600MT Forging Press; 6MT+5MT Hydraulic Hammer;
Heat Treatment Furnace: 20MT-200MT Electric Resistance Furnace;
Machining: 47 sets kinds of machining equipments for round,flat,block and irregular parts;
Physical&Chemical Test: 39 sets kinds of test equipments;
8.What's your advantages?
8-1)Changxiang has complete production line including own electricity power,smelting,forging,machining,heat treatment,
physical&chemical test center and we can control the quality from the primary stage from smelting.
8-2)Changxiang has over 8,000MT kinds of hot forged tool steel stock in our warehouse which all produced by CHANGXINAG.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}